A double male fitting with the lugs at 180° to each other.

WARNING: AN ENTIRE STRUCTURE SHOULD NOT BE CONSTRUCTED FROM SWIVEL FITTINGS ALONE, AS THESE WOULD NOT PROVIDE SUFFICIENT STABILITY OR RIGIDITY IN THE STRUCTURE DUE TO THE FREE ROTATION OF THE FITTING.

Complete double swivel with the swivel connectors at 180° to each other. Each swivel has a travel of approximately 85° from the horizontal in both vertical directions.

WARNING: AN ENTIRE STRUCTURE SHOULD NOT BE CONSTRUCTED FROM SWIVEL FITTINGS ALONE, AS THESE WOULD NOT PROVIDE SUFFICIENT STABILITY OR RIGIDITY IN THE STRUCTURE DUE TO THE FREE ROTATION OF THE FITTING.

When applied to a clean surface this zinc based galvanising spray provides an anti-corrosion protection and is recommended for use on Q Clamp Grub Screws and thread for outdoor installations.

PLEASE  NOTE: Always follow directions for use on can.

Hexagonal key. The allen key is the only tool required to tighten up a Q clamp fitting. The use of a dual ratchet is recommended to achieve the required torque.

Stainless steel 410S grubscrews. These grubscrews are supplied pre fitted into the fittings.

WARNING: DUE TO THE NATURE OF THESE GALVANISED CASTINGS THE MEASUREMENTS GIVEN HERE CANNOT BE PRECISE. WE THEREFORE DO NOT RECOMMEND THAT ANY BOLT HOLES ARE PRE-DRILLED PRIOR TO INSTALLATION.

The Base Flange with kick plate is ideal for guardrailing and balustrading applications where the addition of a kick plate is required. The slotted holes allow for adjustment and ease of fitting.

WARNING: DUE TO THE NATURE OF THESE GALVANISED CASTINGS THE MEASUREMENTS GIVEN HERE CANNOT BE PRECISE. WE THEREFORE DO NOT RECOMMEND THAT ANY BOLT HOLES ARE PRE-DRILLED PRIOR TO INSTALLATION.

Designed for palm fixing of guardrail and balustrades to walls, parapets, steps and ramps. The upright cannot drop through the socket.

A variable angle in line connector (110° -180°) Ideally suited for use between the vertical end post and sloping top rail on stair guard railing.

Often used for mounting boards practically flush with tubes. Fixing holes suit a wide range of common mechanical and chemical masonry anchors.
The tube cannot be joined within the fitting.

Allows for fixing to wooden planking or various panels for flush fitting.