Freely adjustable tee between 30° and 60°. Typical use is a tee connection on angled top rails on steeper slopes or stairs with the upright remaining vertical. This fitting can also be used for bracing on structures. This fitting has no ability to join tubes.

A 3 way enclosed 90° corner joint. Typical use is on straight and level guardrail at a 90° corner where an upright is in position. This Q clamp fitting can also be used to create enclosed corner joints in other square structures such as benches etc.

A 90° elbow. Typical use is to connect the end vertical to the top rail in straight and level guardrail.

Can also be used to create a 90° tube bend.

Alternative to bending to form a connection between a sloping tube and an end post.

The Add on 2 Socket Cross allows additional work to be carried out without dismantling the existing structure.

A 90° joint between a vertical and two horizontals. Typical use on straight and level guardrail to connect the mid/lower rails to the upright. The vertical must remain continuous with cross rails cut. Normally used in conjunction with the Q clamp fitting 104 Long Tee.

The Add on three Way Through allows additional work to be carried out without dismantling the existing structure.

A 90° tee connection between two tubes. Typical use is on straight and level guardrail to connect the vertical to the top rail. This Q clamp fitting can be used to join tubes in the top of the twin grubscrew long tee.

A 90° tee connection between two tubes. Typical use is on straight and level guardrail to connect the vertical to the top rail or end/mid rail to the vertical. This Q clamp fitting cannot be used to join tubes in the top of the short tee. For this the Q clamp fitting 104 Long Tee should be used.

125H fitting has been designed as a variable angle in-line connection, adjustable through 202°.

WARNING: AN ENTIRE STRUCTURE SHOULD NOT BE CONSTRUCTED FROM SWIVEL FITTINGS ALONE, AS THESE WOULD NOT PROVIDE SUFFICIENT STABILITY OR RIGIDITY IN THE STRUCTURE DUE TO THE FREE ROTATION OF THE FITTING