An adjustable tee connection between two tubes. Used on ramps and shallow gradient guardrail between verticals and top rails. This fitting can be used to joint tubes in the long tee.

An adjustable tee connection between two tubes. Used on ramps and shallow gradient guardrail between verticals and top rails or the mid/lower rails to an end vertical. This fitting cannot be used to join tubes in the short tee. For this the Q clamp fitting 204 long tee should be used.

An adjustable tee connection between two tubes. Used on ramps and shallow gradient guardrail between verticals and top rails or the mid/lower rails to an end vertical. This fitting cannot be used to join tubes in the short tee. For this the Q clamp fitting 204 long tee should be used.

An adjustable tee connection between two tubes. Used on ramps and shallow gradient guardrail between verticals and top rails or the mid/lower rails to an end vertical. This fitting cannot be used to join tubes in the short tee. For this the Q clamp fitting 204 long tee should be used.

A galvanised stop end for use in the end of tubes. This stop end is suitable for medium gauge tube only. This is only a friction fit and for a more permanent fix an adhesive is recommended.

A galvanised stop end for use in the end of tubes. This stop end is suitable for medium gauge tube only. This is only a friction fit and for a more permanent fix an adhesive is recommended.

Complete single swivel. The swivel has a travel of approximately 85° from the horizontal in both vertical directions.

WARNING: AN ENTIRE STRUCTURE SHOULD NOT BE CONSTRUCTED FROM SWIVEL FITTINGS ALONE, AS THESE WOULD NOT PROVIDE SUFFICIENT STABILITY OR RIGIDITY IN THE STRUCTURE DUE TO THE FREE ROTATION OF THE FITTING.

Complete single swivel. The swivel has a travel of approximately 85° from the horizontal in both vertical directions.

WARNING: AN ENTIRE STRUCTURE SHOULD NOT BE CONSTRUCTED FROM SWIVEL FITTINGS ALONE, AS THESE WOULD NOT PROVIDE SUFFICIENT STABILITY OR RIGIDITY IN THE STRUCTURE DUE TO THE FREE ROTATION OF THE FITTING.

Complete locating swivel. Swivel has a travel of approximately 85° from the vertical in each direction.

WARNING: AN ENTIRE STRUCTURE SHOULD NOT BE CONSTRUCTED FROM SWIVEL FITTINGS ALONE, AS THESE WOULD NOT PROVIDE SUFFICIENT STABILITY OR RIGIDITY IN THE STRUCTURE DUE TO THE FREE ROTATION OF THE FITTING.

WARNING: THIS FITTING IS NOT RECOMMENDED FOR USE AS A BASE PLATE FOR GUARDRAILING

Complete locating swivel. Swivel has a travel of approximately 85° from the vertical in each direction.

WARNING: AN ENTIRE STRUCTURE SHOULD NOT BE CONSTRUCTED FROM SWIVEL FITTINGS ALONE, AS THESE WOULD NOT PROVIDE SUFFICIENT STABILITY OR RIGIDITY IN THE STRUCTURE DUE TO THE FREE ROTATION OF THE FITTING.

WARNING: THIS FITTING IS NOT RECOMMENDED FOR USE AS A BASE PLATE FOR GUARDRAILING