WARNING: DUE TO THE NATURE OF THESE GALVANISED CASTINGS THE MEASUREMENTS GIVEN HERE CANNOT BE PRECISE. WE THEREFORE DO NOT RECOMMEND THAT ANY BOLT HOLES ARE PRE-DRILLED PRIOR TO INSTALLATION.
Structural flush side palm base fixing guardrailing to wall, steps or ramps etc. The flush design enables posts to be tight to the structure. The tube is unable to pass through the fitting. Should this be required then the base must be reamed out. If the base is reamed out the bottom fixing will become redundant.
| Q CLAMP REF No. | A | B | C | D | E | F | G | Hole Diameter (mm) | Weight (kgs) |
|---|---|---|---|---|---|---|---|---|---|
| 146-2 | 2 | 71 | 63 | 45 | 76 | 24 | 12 | 0.55 | |
| 146-3 | 3 | 82 | 72 | 56 | 83 | 28 | 12 | 0.76 | |
| 146-4 | 4 | 86 | 78 | 61 | 89 | 31 | 12 | 0.83 |
© Tubetrade PLC · 2024 · All rights reserved · Registered Office: Salisbury House, London Wall, London, EC2M 5PS · Company number: 2187492 · VAT number: 520 1380 02
Ten Acres · Berry Hill · Industrial Estate · Droitwich · Worcestershire · WR9 9AQ
Website by FolcraTech
Translate