Our QClamp® castors are supplied as a complete unit attached to a style 149 External Tube Connector. This allows the tube to slot directly into the fitting and then be easily tightened by means of the grub screw located on the side. Unlike other castor fittings on the market, there is no requirement to remove the castor in order to tighten the tube leading to easier and quicker installation.
The castors are supplied either with or without brakes as detailed in the tables below.
With Brake
| Size | Code" | Kgs/each | Box Qty |
|---|---|---|---|
| A - 3/4" | QCW1-B | 0.9902 | 25 |
| B - 1" | QCW2-B | 1.2905 | 20 |
| C - 11/4" | QCW3-B | 1.4885 | 15 |
| D - 11/2" | QCW4-B | 1.5986 | 10 |
Load Capacity: Size’s A & B x 64 kilos
Wheel Size: Size’s A & B x 45mm
Without Brake
| Size | Code" | Kgs/each | Box Qty |
|---|---|---|---|
| A - 3/4" | QCW1 | 0.882 | 35 |
| B - 1" | QCW2 | 1.1205 | 30 |
| C - 11/4" | QCW3 | 1.3185 | 25 |
| D - 11/2" | QCW4 | 1.4286 | 20 |
Load Capacity: Size’s C & D x 100 kilos
Wheel Size: Size’s C & D x 60mm
© Tubetrade PLC 2025 All rights reserved | Registered Office: 6th Floor, 99 Gresham St, London, EC2V 7NG
Website by FolcraTech
Translate