NOTE: When using Q clamp 148 fittings for the top rail of a guardrail,the top of the upright must NOT be reduced in length but left at full height. The top of the tube will need to be capped using a Q clamp 133.
Shown priced and sold as a single fitting but normally used in pairs to create angles between 85° and 235°. A central tube is required to join the fittings together to create the angle. When working out the correct tube length dimension ‘C’ should be subtracted.
| Q CLAMP REF No. | A | B | C | D | E | F | G | Hole Diameter (mm) | Weight (kgs) |
|---|---|---|---|---|---|---|---|---|---|
| 148-1 | 1 | -31 | 53 | 0.18 | |||||
| 148-2 | 2 | -33 | 59 | 0.27 | |||||
| 148-3 | 3 | -40 | 73 | 0.42 | |||||
| 148-4 | 4 | -46 | 93 | 0.60 |
© Tubetrade PLC · 2024 · All rights reserved · Registered Office: Salisbury House, London Wall, London, EC2M 5PS · Company number: 2187492 · VAT number: 520 1380 02
Ten Acres · Berry Hill · Industrial Estate · Droitwich · Worcestershire · WR9 9AQ
Website by FolcraTech
Translate